You get a box when you buy Simple Multisit :

Open it. There is 3 boxes inside and a notecard :

Copy it in your inventory. There is now a folder :

Rez the first box "examples" and open it :

Copy in your inventory. Then drag and drop the new folder in the previous folder "Simple Multisit V4.0" :

Rez the second box "free animations" and open it :

Copy in your inventory. Then drag and drop the new folder in the previous folder "Simple Multisit V4.0". Do the same with the last box :

At last you must have that :

Now you are ready to make the first tutorial.

For this first tutorial we process for an avatar and 3 animations with changing mode and names

Stage setup

1. create a box on the ground. This will be our headquarters for this first example.
2. open the box, yet it is empty

3. drag from your inventory the following animations:

man-sitting
meditation
sit crossed

4.drag the script setup
5.drag the object setball : a ball is created on top of the box.

Take care the object setball must be put in the content, not directly rezzed !!!

6.close the window content
7.click the ball : you are now seated and the ball deforms to be more accessible

8.accept authorization animation

9.choose the button « simple » in the dialog box

a new dialog box appears, yet do not click

10.right click on the ball and switch to edit mode
11.adjust position and rotation

12.click « done » from the dialog box
13.adjust the second pose

14.click « done » from the dialog box
15.adjust the third pose

16.click « done » from the dialog box: the ball disappears and you are ejected
17.click on « Go to page » from the dialog box to open the webpage

18.on the web page select the setup information and copy to clipboard (CTRL C or dialog)

19.in your inventory create a new notecard and call it setupmultisit
20.open the notecard and paste the informations that you have in the clipboard, save the note.

Phase Start

1.open the box: it contains only 3 animations, drag the notecard setupmultisit you just created.
2.drag the script sitmanager
3.drag the script multisit
4.drag the script adjuster

Use of seat

1.Sit on the seat: you take the first pose and a menu opens to offer all of the poses, click one of them to change your pose

2. Type /1a in Chat : the adjust dialog box opens

3.Use the buttons to adjust the pose, finish by pressing the « save » button
4.change the pose and return to the initial pose to verify that the system has saved the adjustment

Alias names and mode change

1. create a notecard that you call configmultisit
2. enter these informations in this notecard:

@version
1

@mode
1

@alias
man-sitting|cosy
sit crossed|straight

3.save the note and drag it in the inventory of the box.

4.when you get the end message of the note sit on the box. You see:

a.change the names of animations in the dialog box. It was produced by that portion of the configuration:

@alias
man-sitting|cosy
sit crossed|straigh

b.the dialog box reappears after selecting a pose. It was produced by the choice of mode 1:

@mode
1

5.open the note configmultisit located in the inventory of the box and replace the previous content from the following:

@version
2

@mode
4

Save the note.

Note: the version number is used to indicate to the script that the contents of the note has changed. If we let the value 1 note was not read. This is very useful in containing an inventory of many notes. Just to update the note increase the value of a unit.

6.when you get the end message of the note sit on the box. This time no dialog box appears. But if you click on the box the pose changes. Mode 4 is indeed the one that corresponds to the change poses with click. You also notice that the poses will follow in setup order.

Change the order of poses

1.reopen the note configmultisit and replace the previous content by the following:

@version
3

@mode
5

@list
meditation
man-sitting
sit crossed

Save the note.

2.when you get the end message of the note sit on the box. You see that once you take first the pose meditation. Indeed the @list command impose an order of poses. You still have no dialog box and no change with a click. Mode 5 is the change in delay. After a period of 10 seconds following pose in the list is implemented and so forth, and back to the first end of the list. The value 10 seconds is the default.
3.If you want another value it must be entered in the note. Replace the contents of the note by the following:

@version
4

@mode
5

@list
meditation
man-sitting
sit crossed

@temp
2

Save the notes.

This time the poses change every 2 seconds.
4.Replace the contents of the note by the following:

@version
5

@mode
7

@list
meditation
man-sitting
sit crossed

@sequence
2
10
15

Save the note.

5.when you get the end message of the note sit on the box. The poses succeed automatically with different deadlines. These deadlines are set by the command @sequence. The first time defined by the @list takes 2 seconds, the second 10 seconds, and the third 15 seconds.

For this second tutorial we process for 2 avatars and many animations

Stage setup (need 2 avatars)

1. Create a box on the floor and enlarged it a bit to sleep two avatars. This will be our bed.

2. Open the box, yet it is empty

3. Drag from your inventory the following animations :

Ground_Kiss_F
Ground_Kiss_M
Laying_Arm_Across_F
Laying_Arm_Across_M
Laying_Makeout_F
Laying_Makeout_M
Laying_Neck_Kiss_F
Laying_Neck_Kiss_M
Laying_Pinned_Kiss_F
Laying_Pinned_Kiss_M
Laying_Propped_Arm_F
Laying_Propped_Arm_M
Laying_Side_F
Laying_Side_M
Laying_Spoon_F
Laying_Spoon_M

4. Drag a script setup

5. Drag the setball object: a ball is created on top of the box

6. An avatar (a nice one if possible) clicks on the ball : it is now seated and the ball deforms to be more accessible

7. The avatar accepts authorization animation

the first animation is in action

8. select "Full" in the menu

9. Right click on the ball and switch to edit mode

10. Adjust position and rotation

11. Drag a second script setup in the inventory

12. Drag a setball object : a second ball is created on top of the box

13. Closethe content window

14. A second avatar clicks on the ball : he is now seated and the ball deforms to be more accessible

15. He accepts avatar animation

16. Select the button "full" in the dialog box.

17. Changes the pose with the "Next" button to change for pose Ground_Kiss_M

18 Right click on the ball and switch to edit mode

19. Adjust position and rotation to align with the first avatar. Repeat if necessary adjustment of the first avatar.

20. When the two avatars are well positioned click "done" to each dialog box. Now the 2 settings are saved. There is an indication *** already ajusted *** in the dialog box :

21. Do the same way with other animations in groups of two :

Laying_Arm_Across_F
Laying_Arm_Across_M

Laying_Makeout_F
Laying_Makeout_M

Laying_Neck_Kiss_F
Laying_Neck_Kiss_M

Laying_Pinned_Kiss_F
Laying_Pinned_Kiss_M

Laying_Propped_Arm_F
Laying_Propped_Arm_M

Laying_Side_F
Laying_Side_M

Laying_Spoon_F
Laying_Spoon_M

You can browse animations with buttons "Back" and "Next".

23. When all animations have been adjusted click "end" in first avatar dialog box : the ball disappears and the avatar is ejected.

24. Click the button "Go to page" in the dialog box to open the webpage

25. in web page select the setup information and copy to clipboard (CTRL C or menu). Here is an example of setup but yours must be different :

Ground_Kiss_F @ -57,22,100 @ 0,0, -84
Laying_Arm_Across_F @ -57,22,100 @ 0,0, -84
Laying_Makeout_F @ -57,22,100 @ 0,0, -84
Laying_Neck_Kiss_F @ -57,22,100 @ 0,0, -84
Laying_Pinned_Kiss_F @ -64,12,100 @ 0,0, -88
Laying_Propped_Arm_F @ -64,23,100 @ 0,0, -93
Laying_Side_F @ -64,23,100 @ 0,0, -93
Laying_Spoon_F @ -64,23,103 @ 0,0, -93

26. in your inventory create a new notecard and call that note setupmultisit, open the notecard and paste setup information that you have in your clipboard

27. Save the notecard setupmultisit you just created and drag it in the inventory of the box

28. Click on button "end" of the second dialog box avatar : the ball disappears and the avatar is ejected

29. Click the button "Go to page" in the dialog box to open the webpage

30. in web page select the setup information and copy to clipboard (CTRL C or menu). Here is an example of setup but yours must be different :

Ground_Kiss_M @ -5,27,97 @ 0,0, -98
Laying_Arm_Across_M @ -5,27,97 @ 0,0, -98
Laying_Makeout_M @ 0,21,101 @ 0.0, -98
Laying_Neck_Kiss_M @ 0,21,101 @ 0.0, -98
Laying_Pinned_Kiss_M @ 0,21,101 @ 0.0, -98
Laying_Propped_Arm_M @ 0,21,101 @ 0.0, -98
Laying_Side_M @ 3,21,101 @ 0.0, -94
Laying_Spoon_M @ 3,21,99 @ 0,0, -94

31. Create a new notecard and call that note setupmultisit, open the notecard and paste setup information that you have in your clipboard

32. Save the notecard setupmultisit you just created and drag it in the inventory of the box

Stage setup and use

1. Open the contents of the box: it contains animations and notecards setupmultisit and setupmultisit 1

2. Drag the script sitmanager

3. Drag a script multisit : seat initializes

4. Drag a second script multisit : seat initialize and script changes its name for multisit 1

5. Drag 2 scripts adjuster, the second changes its name for adjuster 1

6. the first avatar sits. He has the choice of place

he choses the 1 and takes place the first animation

A dialog box is open with a choice of animations

7. the second avatar sits. He has no choice because there is only one seat free now

To change animation must click on the bed, it opens the dialog box with a choice of animations.

But we can improve it by synchronizing all the animations !

Configuration of synchronization

1. Create a notecard that you call configmultisit

2. Enter these informations in this note:

@ version
1

@ api
1000

@ synchro
! 1001
Laying_Side_F | Laying_Side_M
Laying_Spoon_F | Laying_Spoon_M
Laying_Propped_Arm_F | Laying_Propped_Arm_M
Laying_Pinned_Kiss_F | Laying_Pinned_Kiss_M
Laying_Neck_Kiss_F | Laying_Neck_Kiss_M
Laying_Arm_Across_F | Laying_Arm_Across_M
Ground_Kiss_F | Ground_Kiss_M
Laying_Makeout_F | Laying_Makeout_M

Save the note and drag it into the inventory box.

3. Create a second notecard configmultisit

4 Enter these informations in this notecard:

@ version
1

@ api
1001

@ synchro
! 1000
Laying_Side_M | Laying_Side_F
Laying_Spoon_M | Laying_Spoon_F
Laying_Propped_Arm_M | Laying_Propped_Arm_F
Laying_Pinned_Kiss_M | Laying_Pinned_Kiss_F
Laying_Neck_Kiss_M | Laying_Neck_Kiss_F
Laying_Arm_Across_M | Laying_Arm_Across_F
Ground_Kiss_M | Ground_Kiss_F
Laying_Makeout_M | Laying_Makeout_F

Save the note and drag it into the inventory box.

Try the bed now. Nothing has changed in the functionality of two avatars except that now animations are synchronized! When one of two avatars change animation the other chnage also its animation.

To further improve our bed should make reading animations names easier in dialog boxes.

Configuring Alias

1. Open note configmultisit located in the inventory of the box and replace the previous content for the following:

@ version
2

@ api
1000

@ synchro
! 1001
Laying_Side_F | Laying_Side_M
Laying_Spoon_F | Laying_Spoon_M
Laying_Propped_Arm_F | Laying_Propped_Arm_M
Laying_Pinned_Kiss_F | Laying_Pinned_Kiss_M
Laying_Neck_Kiss_F | Laying_Neck_Kiss_M
Laying_Arm_Across_F | Laying_Arm_Across_M
Ground_Kiss_F | Ground_Kiss_M
Laying_Makeout_F | Laying_Makeout_M

@ alias
Laying_Side_F | Side
Laying_Spoon_F | Spoon
Laying_Propped_Arm_F | Propped
Laying_Pinned_Kiss_F | Pinned Kiss
Laying_Neck_Kiss_F | Neck Kiss
Laying_Arm_Across_F | Arm Across
Ground_Kiss_F | Ground Kiss
Laying_Makeout_F | Makeout


Save the note.

2.Open note configmultisit 1 located in the inventory of the box and replace the previous content for the following:

@ version
2

@ api
1001

@ synchro
! 1000
Laying_Side_M | Laying_Side_F
Laying_Spoon_M | Laying_Spoon_F
Laying_Propped_Arm_M | Laying_Propped_Arm_F
Laying_Pinned_Kiss_M | Laying_Pinned_Kiss_F
Laying_Neck_Kiss_M | Laying_Neck_Kiss_F
Laying_Arm_Across_M | Laying_Arm_Across_F
Ground_Kiss_M | Ground_Kiss_F
Laying_Makeout_M | Laying_Makeout_F

@ alias
Laying_Side_M | Side
Laying_Spoon_M | Spoon
Laying_Propped_Arm_M | Propped
Laying_Pinned_Kiss_M | Pinned Kiss
Laying_Neck_Kiss_M | Neck Kiss
Laying_Arm_Across_M | Arm Across
Ground_Kiss_M | Ground Kiss
Laying_Makeout_M | Makeout


Save the note.

Try again in bed. This time the names of the poses in the dialog boxes are shorter and explicit.

But it would be nice if we could also classify the animations in groups ...

Creating Groups

1. Open note configmultisit located in the inventory of the box and replace the previous content for the following:

@ version
3

@ Alias
Laying_Side_F | Side
Laying_Spoon_F | Spoon
Laying_Propped_Arm_F | Propped
Laying_Pinned_Kiss_F | Pinned Kiss
Laying_Neck_Kiss_F | Neck Kiss
Laying_Arm_Across_F | Arm Across
Ground_Kiss_F | Ground Kiss
Laying_Makeout_F | Makeout

@ api
1000

@ synchro
! 1001
Laying_Side_F | Laying_Side_M
Laying_Spoon_F | Laying_Spoon_M
Laying_Propped_Arm_F | Laying_Propped_Arm_M
Laying_Pinned_Kiss_F | Laying_Pinned_Kiss_M
Laying_Neck_Kiss_F | Laying_Neck_Kiss_M
Laying_Arm_Across_F | Laying_Arm_Across_M
Ground_Kiss_F | Ground_Kiss_M
Laying_Makeout_F | Laying_Makeout_M

@ group
! Group1
Laying_Side_F
Laying_Spoon_F
Laying_Propped_Arm_F
! group2
Laying_Pinned_Kiss_F
Laying_Neck_Kiss_F
Laying_Arm_Across_F
Ground_Kiss_F
Laying_Makeout_F

Save the note.

2. Open note configmultisit 1 located in the inventory of the box and replace the previous content for the following:

@ version
3

/ / @ Mode
1

@ alias
Laying_Side_M | Side
Laying_Spoon_M | Spoon
Laying_Propped_Arm_M | Propped
Laying_Pinned_Kiss_M | Pinned Kiss
Laying_Neck_Kiss_M | Neck Kiss
Laying_Arm_Across_M | Arm Across
Ground_Kiss_M | Ground Kiss
Laying_Makeout_M | Makeout

@ api
1001

@ synchro
! 1000
Laying_Side_M | Laying_Side_F
Laying_Spoon_M | Laying_Spoon_F
Laying_Propped_Arm_M | Laying_Propped_Arm_F
Laying_Pinned_Kiss_M | Laying_Pinned_Kiss_F
Laying_Neck_Kiss_M | Laying_Neck_Kiss_F
Laying_Arm_Across_M | Laying_Arm_Across_F
Ground_Kiss_M | Ground_Kiss_F
Laying_Makeout_M | Laying_Makeout_F

@ group
! Group1
Laying_Makeout_M
Laying_Side_M
Laying_Spoon_M
Laying_Propped_Arm_M
! group2
Laying_Pinned_Kiss_M
Laying_Neck_Kiss_M
Laying_Arm_Across_M
Ground_Kiss_M

Save the note

Try again in bed. Now the dialog boxes have changed. The poses are classified into groups.

But there is perhaps something that could be improved. It would be nice if the dialog boxes were persistent.

Changing the operating mode

1. Open note configmultisit located in the inventory of the box and replace the version parameter and add the mode:

@ version
4

@ mode
1

2. Do the same thing with the note configmultisit 1

Now the dialog boxes are persistent. There are many other modes that you find in other sections of these tutorials.

To further improve our bed would be nice if the choice of seats was done with more explicit names ...

Configutation of sitmanager

1 Create a note that you call configManager. Put this information in:

@ version
1

@ mode
2

@ words
woman
man

Save the note and put it in the inventory of the box.

Now the names of buttons are more explicit :